Agilent 1100 Series HPLC System

Description

Agilent 1100 Series HPLC System

This item comes with a 30-day Repair or Replace warranty.   

This HPLC system is in very good condition. All operational testing was completed successfully, and each unit functions as intended. We used in-house software for testing. Please Note: If you need computer and software, please contact us for information prior to ordering, otherwise will come only with what is shown.

G1313A – Autosampler  

• Injection Range: 0.1 µL to 100 µL, with 0.1 µL increments  
• Replicate Injections: 1 to 99 per vial  
• Sample Capacity: 100 x 2 mL vials per tray  
• Minimum Sample Volume: 1 µL from a 5 µL sample in a 100 µL micro vial  
• Injection Cycle Time: Typically, 50 seconds  
• Carryover: Typically, < 0.01% to < 0.05%  
• Sample Viscosity Range: 0.2 cp to 50 cp  
• Physical Dimensions: 200 mm (height) x 345 mm (width) x 435 mm (depth)  
• Weight: 14.2 kg (31.3 lbs)  
• Power Requirements: 100-120 or 220-240 VAC, ± 10%, 50 or 60 Hz 

G1316A – Thermostatted Column Compartment (TCC)

• Temperature Range: 10°C below ambient to 80°C  
• Temperature Stability: ± 0.15°C  
• Temperature Accuracy: ± 0.8°C  
• Column Capacity: Three 30 cm columns  
• Warm-up/Cool Down Time: 5 minutes from ambient to 40°C    

G1315B – Diode Array Detector (DAD) 

• Detection Type: 1024-element photodiode array  
• Light Source: Deuterium and tungsten lamps  
• Wavelength Range: 190 – 950 nm  
• Short Term Noise: ± 1 x 10^-5 AU at 254 and 750 nm  
• Drift: 2 x 10^-3 AU/hr at 254 nm  
• Linear Absorbance Range: > 2 AU (upper limit)  
• Wavelength Accuracy: ± 1 nm  
• Slit Width: Programmable slit widths of 1, 2, 4, 8, and 16 nm  
• Flow Cells: Various options including standard, semi-micro, micro, high pressure, and nano flow cells  
• Control and Data Evaluation: Agilent ChemStation for LC  
• Analog Outputs: Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, two outputs  
• Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote, LAN optional  
• Safety and Maintenance: Extensive diagnostics, error detection, leak detection, and safe leak handling  
• Power Requirements: 100 – 240 VAC, 50 or 60 Hz, 300 VA / 125 W / 427 BTU 

G1312A – Binary Pump  

• Weight: 34 lbs.  
• Dimensions: 7 x 13.5 x 17 in. 
• Electrical: 100 – 240 VAC, ± 10% ~ 50/60Hz ~ 220VA ~ 74W ~ 253BTU  
• Ambient Operating Temp: 4–55 °C (41–131 °F)  
• Ambient Non-Operating Temp: -40–70 °C (-4–158 °F)  
• Maximum Operating Pressure: 600 bar (8700 psi)  
• Flow Rate Range: 0.1 – 5 mL/min  
• Flow Precision: < 0.07% RSD or < 0.02 min SD  
• Flow Accuracy: ± 1% or 10 µL/min 

G1379A – Micro Vacuum Degasser  

• Channels: 4-channel vacuum container  
• Membranes: 4 micro-structured membranes  
• Vacuum Pump: Integrated  
• Internal Volume: 480 µL per channel  
• Maximum Flow Rate: 10 mL/min per channel  
• Operating Temperature: 4–55 °C (41–131 °F)  
• Power Consumption: 30 VA 

Ebay

Contact Us