Description
AKTA Explorer FPLC System w/Toughbook and Software
System will be some with a 90 day warranty. Purchase will include everything pictured.
CU-950:
The general system unit that manages the control of almost all ÄKTA design™ systems. The controller is a real-time processing unit that executes the methods made in UNICORN as well as manual system interactions.
pH/C-900 Monitor:
- Accuracy: The greater of ± 2% of full scale or ± 10 µS/cm in the range 1 µS/cm-300 mS/cm ± 0.1 pH unit, temperature compensated Max. 0.1 pH units within 0–10 ml/min (pH measurement)
- Operating pressure max.: 50 bar (5 MPa) (725 psi)
- Conductivity: 1 µS/cm-999.9 mS/cm
- Operating Temperature: 4°C-40°C
- Relative humidity: 20%-95% (non condensing)
- Baseline noise: ± 0.5% of full-scale calibrated range
- Drift: Max. 0.02 pH/h (measured at pH 4.0) ±0.5 °C per 10 h 0.1 pH unit deviation/10 h
- Cell Constant: 50 ± 20 cm-1
- Response Time: Max. 10 s (0–95% of step) (pH measurements) Max. 3 s (0–95% of step) (Conductivity measurement)
- Voltage: 100-120/220-240 VAC
- Protection class: IP 20 (Housing) IP 44 (Flow cell)
- Material: Glass Perfluororubber (FFKM) Polyetheretherketone (PEEK) Polytetrafluoroethylene (PTFE) Titanium alloy (Ti alloy) Chlorotrifluoroethylene (CTFE)
UV-900 Monitor:
- Accuracy: ±2 nm
- Operating pressure max.: 2 MPa
- Operating Temperature: 4°C-40°C
- Relative humidity: 20%-95% (non condensing)
- Linearity: < 2% deviation up to 2 AU at 260 nm with Uracil at pH 2
- Baseline noise: < 60 μAU at 230 nm
- Drift: < 2×10-4 AU/h at 254 nm
- Voltage: 100-120/220-240 VAC
- Protection class: IP 20
- Material: Polyetheretherketone (PEEK) Polytetrafluoroethylene (PTFE) Titanium alloy (Ti alloy) Glass
P-900 Pump:
- Accuracy: ±2% or 20 μl/min whichever is greater (0.2–10.0 MPa)
- Analog Output: Pressure, 0 to 1V
- Chemical stability: The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100% Ethylacetate, 100% Hexane, and 100 % Tetrahydrofuran (THF).
- Connections: Fingertight connector
- Flow rate: 0.01-100 ml/min
- Material: Polyetheretherketone (PEEK) Polytetrafluoroethylene (PTFE) Ethylenechlorotrifluoro-ethylene (ECTFE) Polyvinylidenefluoride(PVDF) Polyethylene (PE) Titanium Titanium alloy (Ti alloy) Aluminium oxide (Al oxide) Ruby Zirconia Super high resistent stainless steel
- Operating pressure max.: 100 bar (10 MPa) (1450 psi)
- Operating Temperature: 4°C- 40°C
- Power consumption: Max. 400 VA with all extra components connected
- Protection class: IP 20 (Housing)
- Relative humidity: 20%-95% (non condensing)
- Viscosity Max.: 5 cP
- Voltage: 100-120/220-240 VAC
rbb – R1 A3 P7
Ebay
