Description
Waters Alliance 2695 Separations Module with 996 Photodiode Array Detector
2695 Separations Module:
- Operating Temperature: 4 to 40 C (39 to 104 F)
- Relative Humidity: 20 to 80%, noncondensing
- Acoustic Noise: <65 dB(A)
- Power Requirements: 950 VA (maximum), 85 to 132 Vac or 180 to 250 Vac, 47 to 63 Hz
- Effective System Delay Volume: <650 µL
- Plunger Seal Wash: Integral, active, programmable
- Dry Prime/Wet Prime: Automatic, front panel control
- Flow Ramping Time: (0.01 to 30.00 min in 0.01-min increments) to reach maximum flow rate
- Maximum Operating Pressure: 5000 psi (345 bar)
- Pressure Ripple: ≤2.5%
- Composition Range: 0.0 – 100.0 in 0.1% increments
- Composition Accuracy: ±0.5% absolute
- Composition Precision: ≤0.15% RSD or ≤0.02 min SD
- Flow Precision: ≤0.075% RSD or ≤0.02 min S
- D Flow Accuracy: ±1% or 10 µL/min
996 Photodiode Array Detector:
- Wavelength Range: 190 to 800 nm
- Wavelength Accuracy: ±1 nm
- Linearity Range: 5% over -0.1 to 2.0 AU
- Spectral Resolution: 1.2 nm per photodiode
- Baseline Noise: 5 x 10 -5 AU peak-to-peak
- Drift: 1 x 10 -3 AU/hour at 254 nm (after warmup)
- Operating Temperature: 4to 40°C (39° to 104°F)
- Operating Humidity: 20 to 80% non-condensing
- Flow Cells: Standard Pathlength: 10 mm, Semi-Preparative Pathlength: 3 mm, Microbore Pathlength: 6 mm, Inert Pathlength: 10 mm
- Electrical Requirements: 100-240 V, 50/60 Hz, 3.5 A, F4a/250
- Maximum Pressure: 1000 psi, 68.9 bar
rbb – R1 F3 P70