Amersham Pharmacia Biotech AKTA Purifier System with Computer and Software

$14,995.00

1 in stock

Description

Amersham Pharmacia Biotech AKTA Purifier System w/ Computer & Software – fully tested

System comes with: 

Amersham AKTA Box 900 ~ pH/C 900 Monitor ~ UV-900 Monitor ~ P-900 Pump ~ M-925 Mixer ~ INV-907 & 908 Valve ~ CU-950 Control Unit ~ HP Cpmpaq dc7900 Desktop & Unicorn Software 

pH/C-900 Monitor:  

  • Accuracy: The greater of ± 2% of full scale or ± 10 µS/cm in the range 1 µS/cm-300 mS/cm ± 0.1 pH unit, temperature compensated Max. 0.1 pH units within 0–10 ml/min (pH measurement)  
  • Operating pressure max.: 50 bar (5 MPa) (725 psi)  
  • Conductivity: 1 µS/cm-999.9 mS/cm  
  • Operating Temperature: 4°C-40°C  
  • Relative humidity: 20%-95% (non condensing)  
  • Baseline noise: ± 0.5% of full-scale calibrated range  
  • Drift: Max. 0.02 pH/h (measured at pH 4.0) ±0.5 °C per 10 h 0.1 pH unit deviation/10 h  
  • Cell Constant: 50 ± 20 cm-1  
  • Response Time: Max. 10 s (0–95% of step) (pH measurements) Max. 3 s (0–95% of step) (Conductivity measurement)  
  • Voltage: 100-120/220-240 VAC  
  • Protection class: IP 20 (Housing) IP 44 (Flow cell)  
  • Material: Glass Perfluororubber (FFKM) Polyetheretherketone (PEEK) Polytetrafluoroethylene (PTFE) Titanium alloy (Ti alloy) Chlorotrifluoroethylene (CTFE) 

  

UV-900 Monitor: 

  • Accuracy: ±2 nm  
  • Operating pressure max.: 2 MPa  
  • Operating Temperature: 4°C-40°C  
  • Relative humidity: 20%-95% (non condensing)  
  • Linearity: < 2% deviation up to 2 AU at 260 nm with Uracil at pH 2  
  • Baseline noise: < 60 μAU at 230 nm  
  • Drift: < 2×10-4 AU/h at 254 nm  
  • Voltage: 100-120/220-240 VAC  
  • Protection class: IP 20  
  • Material: Polyetheretherketone (PEEK) Polytetrafluoroethylene (PTFE) Titanium alloy (Ti alloy) Glass   

 

P-900 Pump: 

  • Accuracy: ±2% or 20 μl/min whichever is greater ( 0.2–10.0 MPa)  
  • Analog Output: Pressure, 0 to 1V  
  • Chemical stability: The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100% Ethylacetate, 100% Hexane, and 100 % Tetrahydrofuran (THF).  
  • Connections: Fingertight connector  
  • Flow rate: 0.01-100 ml/min 
  • Material: Polyetheretherketone (PEEK) Polytetrafluoroethylene (PTFE) Ethylenechlorotrifluoro-ethylene (ECTFE) Polyvinylidenefluoride(PVDF) Polyethylene (PE) Titanium Titanium alloy (Ti alloy) Aluminium oxide (Al oxide) Ruby Zirconia Super high resistent stainless steel  
  • Operating pressure max.: 100 bar (10 MPa) (1450 psi)  
  • Operating Temperature: 4°C-40°C  
  • Power consumption: Max. 400 VA with all extra components connected  
  • Protection class: IP 20 (Housing)  
  • Relative humidity: 20%-95% (non condensing)  
  • Viscosity Max.: 5 cP 
  • Voltage: 100-120/220-240 V AC  

  

M-925 Mixer:  

  • Flow rate: 0.001-100 ml/min 
  • Material: Polyetheretherketone (PEEK), Polytetrafluoroethylene (PTFE) 
  • Operating pressure max: 100 bar (10 MPa) at 0.1 to 100 ml/min (12 ml chambers) 250 bar (25 MPa) at 0.001 to 100 ml/min (0.6, 2 and 5 ml chambers) 350 bar (35 MPa) at 0.001 to 5 ml/min (90 μl and 0.2 ml chambers) (1450 psi at 0.1 to 100 ml/min (12 ml chambers) 3625 psi at 0.001 to 100 ml/min (0.6, 2 and 5 ml chambers) 5075 psi at 0.001 to 5 ml/min (90 μl and 0.2 ml chambers)) 
  • Operating Temperature: 4°C-40°C 
  • pH Stability Long Term: 1-13 
  • pH Stability Short Term: 1–14 
  • Power consumption: 1 VA 
  • Power requirements: 12 to 40 V DC from the pump 
  • Protection class: IP 43 
  • Relative humidity: 20%-95% (non condensing) 
  • Viscosity Max: 5 cP   

 

INV-907 Motor Valve: 

  • Chemical stability: For use with all aqueous solutions and organic solvents commonly employed in chromatography  
  • Connections: UNF 10-32 2B fingertights for capillary tubing o.d. 1/16″  
  • Flow Channel i.d.: 0.8 mm  
  • Flow rate: < 100 ml/min  
  • Material: Polyetheretherketone (PEEK)  
  • Operating Temperature: 4°C-40°C  
  • pH Stability Long Term: 1-13  
  • Power consumption: 1.1 VA  
  • Power requirements: 32 VDC from Pump P-901  
  • Relative humidity: 20%-95%  
  • Viscosity Max.: <5 cP 
  • Wetted Materials:  Polyetheretherketone (PEEK)  
  • Wetted Part: Yes  
  • Number of Ports: 7  
  • Operating Pressure Max: 250 bar (25 MPa) (3626 psi) 

 

PV-908 Motor Valve:  

  • Chemical stability: For use with all aqueous solutions and organic solvents commonly employed in chromatography 
  • Connections: UNF 10-32 2B fingertights for capillary tubing o.d. 1/16″ 
  • Flow Channel i.d.: 0.8 mm 
  • Flow rate: < 100 ml/min 
  • Operating Temperature: 4°C-40°C 
  • pH Stability Long Term: 1-13 
  • Power consumption: 1.1 VA 
  • Power requirements: 32 VDC from Pump P-901 
  • Relative humidity: 20%-95% 
  • Viscosity Max: <5 cP 
  • Wetted Materials: Polyetheretherketone (PEEK) 
  • Wetted Part: No 
  • Number of Ports: 8 
  • Operating Pressure Max: 250 bar (25 MPa) (3626 psi) 

 

CU-950 Control Unit:  

  • Guidance: 1.8 m output cable with 5.5mm outer and 2.5 inner diameter DC connector Important: For CU-950 with new type of connector (1.8m output cable with 3-pin KPPX3P connector) order Power Supply CU-950 28-9387-74 
  • Wetted Part: No 

 

 
jb – ta

Additional information

Weight 113.40 lbs
Model

MPN

Brand

Chromatography Technique

260 Interstate Circle
Suite 2A
Frederick , MD 21704

Call us

301 803 9722
240 375 6333