Description
Thermo Scientific 7454 CryoMed Controlled Rate Freezer
This item is in very good condition. Tested to -35 degrees. Feet need to be replaced.
The built-in thermal printer has internal software switch settings that control how the printer interfaces with the Controlled Rate Freezer.
-
- Capacity: 1.7 cu ft
- Non-IVF ~ with thermal printer
- Static Holding Time: Up to 125 days
- Rack Capacity: 4
- Chamber Temperature Range: +50°C to -180°C
- Chamber Freezing Rate: Minimum 0.1°C / min Maximum 99.9°C / min over operating temperature range (Note Rates vary based on load, LN2 pressure, unit size, and voltage)
- Chamber Warming Rate: Minimum of 0.1°C / min (no load, T-couple in free air, center of chamber) Maximum of 12.0°C / min (same conditions as above) Average of 9.0°C / min (same conditions as above, range -40°C to -12°C)
- Construction Interior: Stainless steel with removable ductwork for ease of cleaning Exterior: Stainless steel with powder coated finish
- Insulation: Foamed in place polyurethane door and cabinet
- Air Flow: Horizontal from right to left, as viewed from the front
- Sound Level Unit in Operation: Does not exceed 65 dBA.
- Electrical: Nominal: 120VAC, 60Hz, 1PH, 12.0 FLA
- Altitude: Up to 2,000 meters
- Environmental Temperature: 5°C to 40°C
- Humidity: 80% RH at or below 31°C, decreasing linearly to 50% RH at 40°C
- Exterior Dimensions (WxDxH): 43.7 x 20.1 x 21.2 in.
- Interior Dimensions (WxDxH): 19 x 13 x 12 in.
- Weight: 180 lbs.
- his item is in very good condition. Tested to -35 degrees. Feet need to be replaced.
rk – 008895 R2.C1.P2
